When sourcing silicone baby plates, bowls, spoons or complete feeding sets, you will often see suppliers advertise “FDA approved” or “LFGB certified.” These phrases sound reassuring, but they can hide an important question: which food-contact requirements does the finished product actually meet?

The United States and Germany/EU use different regulatory frameworks. For baby-care brands and wholesale buyers, the goal is not to choose the better-sounding badge. It is to match material selection, finished-product testing and documentation to your destination market and intended use.

Coordinated silicone baby feeding set with food-contact bowls plates and utensils
Silicone baby feeding sets combine multiple product shapes and food-contact surfaces, all of which need suitable material assessment.
01 / COMPARISON

FDA vs LFGB: What Is the Actual Difference?

In everyday sourcing language, “FDA testing” usually refers to demonstrating compliance with relevant U.S. food-contact provisions; “LFGB testing” usually means laboratory testing selected for the German market. Neither term describes a universal government-issued certification for every silicone baby product.

Buyer questionUnited States: FDA frameworkGermany / EU: LFGB and EU framework
Which market?Products placed on the U.S. marketProducts placed on the German / EU market
Key referencesApplicable food-contact authorizations; for relevant reusable silicone rubber articles, 21 CFR § 177.2600Regulation (EC) No 1935/2004, GMP Regulation (EC) No 2023/2006, applicable national requirements; BfR Recommendation XV may support silicone assessment
What is checked?Formulation and intended-use limitations; relevant extractives or other supporting evidenceGeneral safety, relevant migration or extractables, sensory and other tests appropriate to the material and use
Official product certificate?Not a general “FDA-approved silicone tableware” certificateNot a universal government-issued “LFGB certificate”
What buyers requestApplicable regulatory references, material documentation and product-specific laboratory reportsTest reports tied to the intended article, relevant legal criteria, use conditions and traceability information

Practical takeaway: A claim is only as useful as the evidence behind it. Ask what was tested, against which criteria, and whether the report applies to the product you intend to purchase.

02 / UNITED STATES

What Does “FDA Compliant” Mean for Silicone Baby Tableware?

The U.S. Food and Drug Administration regulates substances used in food-contact articles through the Federal Food, Drug, and Cosmetic Act and applicable authorizations. For certain reusable silicone rubber articles, 21 CFR § 177.2600 is an important reference.

That provision addresses permitted rubber ingredients and extractives limits under specified conditions. Compliance depends on the actual formulation and intended food-contact application—not merely on whether a supplier describes its raw silicone as “food grade.” Other provisions may apply to particular materials or products.

The FDA also explains that the status of a finished food-contact material depends on its constituent substances and their permitted conditions of use. In practice, buyers should ask for the precise basis of compliance, rather than an unexplained “FDA certificate.”

Translucent colored silicone divided baby plate with multiple food-contact compartments
Colorants, curing systems and finished geometry are part of the product under review.
CHECK THE MATERIALSilicone formulation

Confirm the base polymer, additives, pigment system and relevant composition restrictions.

CHECK THE USEFood contact and temperature

Confirm whether the item is intended for warm food, repeated use, freezing or cleaning conditions.

03 / GERMANY & EUROPEAN UNION

What Do LFGB, EU 1935/2004 and BfR Actually Cover?

For silicone baby tableware sold in the EU, the starting point is Regulation (EC) No 1935/2004. It establishes general food-contact safety, labeling and traceability principles. Commission Regulation (EC) No 2023/2006 requires good manufacturing practice for food-contact materials.

In Germany, the Lebensmittel- und Futtermittelgesetzbuch (LFGB) is national legislation relevant to food and consumer articles. The German Federal Institute for Risk Assessment (BfR) also publishes Recommendation XV on Silicones. Those recommendations are scientific and technical guidance, not legally binding standards or an official BfR product approval.

A frequent mistake: EU 10/2011 is not the general silicone standard

Regulation (EU) No 10/2011 addresses plastic food-contact materials and explicitly excludes silicones from its scope. Do not assume that a silicone bowl must simply “pass EU 10/2011.” Ask the laboratory to identify the relevant silicone test plan and applicable EU or national requirements.

Color-coordinated silicone baby feeding set including shaped divided plate and feeding accessories
A coordinated feeding set may contain multiple food-contact articles.
Morandi color silicone baby tableware assortment with sections and utensils
Different shapes and colors should be considered in the compliance plan.

For an importer, the real question is whether the evidence addresses the specific item, formulation, intended contact conditions and current requirements in the market of sale—not whether the document uses a familiar acronym.

04 / DOCUMENT REVIEW

Six Things to Check Before Accepting an FDA or LFGB Test Report

A one-page pass certificate is not enough for a serious sourcing decision. Request the underlying report or a complete test summary and review these six points.

01

Product identification

Does the report identify the actual plate, bowl, spoon or feeding set, including the relevant SKU or sample description?

02

Material and color

Was the tested formulation the same as your production material? Check pigment variations and other additives.

03

Test basis

Are the regulation, recommendation or testing method clearly cited, with the scope appropriate for silicone?

04

Contact conditions

Do time, temperature and selected food simulants or extraction conditions reflect the intended use?

05

Actual results

Review measured results, any applicable limits, conclusions, sample date and report date—not only the words “PASS.”

06

Lab and traceability

Identify the laboratory, its relevant accreditation scope, report number and link to the approved production batch.

Buyer tip: A valid report on a natural-color silicone sample does not automatically prove that every later color, material change or finished configuration has been assessed. Agree on a representative sampling plan with the laboratory and supplier.

05 / PRODUCT DESIGN

Why the Specific Baby Feeding Product Matters

Silicone feeding products share a material family but not necessarily the same risk profile. A shallow divided plate, a deep suction bowl and a spoon may be used with different foods, temperatures, accessories and cleaning methods. A set with stainless-steel or plastic components adds another material to the review.

Silicone baby suction divided feeding plate with lid
Plates & traysReview surface area, compartments, pigments and expected food contact.
Silicone baby feeding bowl with curved inner surface
BowlsReview intended hot-food use, rim design, suction structure and cleaning.
Bunny design silicone baby tableware set with feeding utensils
Spoons & setsCheck all food-contact surfaces, mixed materials and age-appropriate product safety needs.

Is BPA-Free the Same as Food-Contact Compliance?

No. “BPA-free” addresses one specific chemical claim; it does not demonstrate that the formulation, pigments, manufacturing residues or finished article meet all relevant requirements. For a deeper discussion, see our guide to why BPA-free alone is not enough for silicone safety.

Colorful baby tableware also requires attention to the full pigment system—not only the base silicone. Our related article explains how to evaluate pigments for colored baby silicone products.

06 / SOURCING WORKFLOW

A Practical Compliance Workflow for OEM Baby Feeding Sets

For private-label and OEM projects, compliance planning should begin before the mold is finalized. At Silicone Solution, product specifications can be reviewed alongside material, sampling and production requirements so the buyer knows which evidence must be obtained for the target market.

01Define the product

List the exact items, materials, colors, age group and intended contact conditions.

02Select the specification

Confirm food-contact material options, hardness, pigments and the necessary market-specific test scope.

03Approve samples

Review production-intent samples and agree with the laboratory on the required test plan.

04Control production

Maintain material identification, manufacturing parameters, inspection and batch records as agreed.

Technician checking silicone molding production equipment at factory
Silicone molding process review
Silicone production quality inspection workers checking molded products
Visual inspection and batch quality checks

Regulatory documentation and product performance are related but separate tasks. Chemical food-contact testing does not, by itself, prove that a suction plate will stay attached, that a spoon is mechanically suitable for children, or that a lid seals correctly. These functions require their own agreed design and performance checks.

07 / FREQUENT QUESTIONS

FAQ: FDA and LFGB for Silicone Baby Tableware

Is LFGB certification mandatory for every silicone baby product sold in Europe?

There is no universal government-issued “LFGB certificate.” Products placed on the EU market must meet applicable EU food-contact requirements and any relevant national provisions. German market testing may use LFGB-related criteria and BfR silicone recommendations as part of the assessment. Confirm the exact obligations for the product and destination country.

Is LFGB always stricter than FDA?

There is no reliable blanket ranking. The two systems cover different legal requirements and testing conditions. Compare the actual scope of the reports, the sample tested and the intended use rather than assuming one acronym automatically supersedes the other.

Can a silicone baby plate be described as “FDA approved”?

A seller should not claim FDA product approval without a genuine, applicable FDA authorization. For ordinary silicone food-contact tableware, more precise language identifies the relevant U.S. food-contact requirements supported by documentation. A third-party test report is not an FDA-issued product approval.

Does a raw-material certificate cover every finished feeding set?

Not necessarily. Processing, pigments, additives, mixed components and use conditions can affect finished-product compliance. Ask which exact articles and production formulations the supplied documentation covers.

Does a BPA-free declaration replace food-contact testing?

No. A BPA-free claim concerns a particular substance. Buyers must also check the broader composition, relevant extractables or migration assessment, applicable regulations and the conditions in which the product will contact food.

Enrique

Hi, I am the author of this article. For the past 10 years or so, we have been dedicated to meeting the custom silicone product needs of our customers from over 50 countries and regions around the world. If you have any questions, please contact us for a free, no-obligation quote.

Share this article now

Leave A Comment

Looking for a Reliable and Efficient Silicone Manufacturer?

Partner with SILICONE SOLUTION for top-quality manufacturing services. Contact us today to discuss your specific needs and discover how we can help bring your vision to life!

Please fill out our form and our silicone experts will contact you within 24 hours.

If you only have an idea, we can help you design your product. If you already have CAD drawings, we can help you achieve mass production quickly.